Juniper certification JN0-201 exam training materials

A lot of IT people want to pass Juniper certification JN0-201 exams. Thus they can obtain a better promotion opportunity in the IT industry, which can make their wages and life level improved. But in order to pass Juniper certification JN0-201 exam many people spent a lot of time and energy to consolidate knowledge and didn't pass the exam. This is not cost-effective. If you choose ITCertKing's product, you can save a lot of time and energy to consolidate knowledge, but can easily pass Juniper certification JN0-201 exam. Because ITCertKing's specific training material about Juniper certification JN0-201 exam can help you 100% pass the exam. If you fail the exam, ITCertKing will give you a full refund.

The society has an abundance of capable people and there is a keen competition. Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever. Qualifications is just a stepping stone, and strength is the cornerstone which can secure your status. Juniper JN0-201 certification exam is a popular IT certification, and many people want to have it. With it you can secure your career. ITCertKing's Juniper JN0-201 exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance. Then you no longer need to worry about being fired by your boss.

ITCertKing Juniper JN0-201 exam questions are compiled according to the latest syllabus and the actual JN0-201 certification exam. We are also constantly upgrade our training materials so that you could get the best and the latest information for the first time. When you buy our JN0-201 exam training materials, you will get a year of free updates. At any time, you can extend the the update subscription time, so that you can have a longer time to prepare for the exam.

When you're in pain, it is best to learn things. Learning will make you invincible. ITCertKing Juniper JN0-201 exam training materials can also help you to be invincible. With this training materials, you will receive the Juniper JN0-201 certification which recognized and accepted internationally. Then all of your life, including money and position, will improve a lot. Until then, will you still feel painful? No, you will be very happy. You should thanks ITCertKing which provide you with a good training materials. It can help you when you lost, and let you not only improve your own quality, but also demonstratethe value of your perfect life.

Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2014-02-18

JN0-201 Free Demo Download: http://www.itcertking.com/JN0-201_exam.html

NO.1 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC

Juniper original questions   JN0-201 braindump   JN0-201   JN0-201

NO.2 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD

Juniper demo   JN0-201   JN0-201   JN0-201   JN0-201 demo   JN0-201 exam

NO.3 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD

Juniper   JN0-201 exam prep   JN0-201 exam dumps   JN0-201 dumps

NO.4 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A

Juniper   JN0-201 test answers   JN0-201

NO.5 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A

Juniper exam prep   JN0-201 exam   JN0-201   JN0-201   JN0-201 practice test

NO.6 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B

Juniper   JN0-201   JN0-201 test   JN0-201

NO.7 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C

Juniper   JN0-201   JN0-201

NO.8 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C

Juniper braindump   JN0-201 test   JN0-201 test answers

NO.9 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B

Juniper   JN0-201   JN0-201   JN0-201   JN0-201 test answers   JN0-201

NO.10 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B

Juniper certification   JN0-201 exam   JN0-201 questions   JN0-201

NO.11 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B

Juniper   JN0-201 answers real questions   JN0-201 exam simulations

NO.12 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC

Juniper   JN0-201   JN0-201 certification   JN0-201   JN0-201

NO.13 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-201 pdf   JN0-201   JN0-201 exam simulations

NO.14 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A

Juniper test questions   JN0-201 test   JN0-201 exam dumps   JN0-201 demo   JN0-201 original questions

NO.15 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A

Juniper   JN0-201 test questions   JN0-201 test questions   JN0-201 exam   JN0-201

NO.16 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A

Juniper   JN0-201 test questions   JN0-201

NO.17 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A

Juniper original questions   JN0-201 demo   JN0-201 exam dumps   JN0-201

NO.18 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B

Juniper   JN0-201   JN0-201 exam simulations

NO.19 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB

Juniper   JN0-201   JN0-201 braindump   JN0-201

NO.20 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D

Juniper original questions   JN0-201 exam dumps   JN0-201 braindump   JN0-201 original questions   JN0-201 exam prep   JN0-201

ITCertKing offer the latest 74-353 exam material and high-quality 70-489 pdf questions & answers. Our 000-455 VCE testing engine and C_HANAIMP131 study guide can help you pass the real exam. High-quality 000-623 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-201_exam.html